How to Get Rid of Squeaky Office Chair?

Squeaky office chairs and the constant noise doesn’t necessarily mean it is time for a new chair. Well, there are a few ways to get rid of the squeaky office chairs.

How to get rid of the Squeaky Office Chair? To get rid of a squeaky office chair, at first, find the exact area from where the sound is initiated. Then try to tighten the screws; if the squeaking is still occurring, you need to remove them and apply lubricating oil. In the case of the wheels, apply some silicone oils. 

I know squeaky office chairs can be pretty annoying for any situation. It may be at home or in an office environment; it leads to concentration breaks and reduces productivity.

This article will cover various ways to get rid of the office chair with squeaky sound and also provide various tips regarding this so that you don’t have to compromise with your work.

How Can I Make My Office Chair Stop Squeaking?

Fixing an office chair squeaking could be a difficult process but here is our step by step process to make the work as smooth as possible.

Here is a Step-By-Step process To Fix The Squeaking Office Chairs Using Lubricant:

Step 1 – Careful Observation Of The Nuts, Bolts, And Screws

In the beginning, you need to turn the chair over and observe the hardware. You might see some of the nuts and bolts are loosened. Use a screwdriver or a wrench to tighten those. 

I recommend you tighten the ones that might seem loose as it is pretty typical for the screws and bolts to become loose, which can cause the chair parts to create a squeaky noise. You should regularly check these to avoid unwanted sounds.  

Step 2 – Removing The Components (Bolts, And Screws)

It is expected that the chair might still squeak. In such a case, I recommend you apply some lubricant to the bolts and screws. 

But before that, you need to carefully take the components out of the chairs. Keep the chair upside down while taking off the screws and bolts. 

Step 3 – Check The Chair To Locate The Squeaking Area 

It can be hard to locate the area of the chair that is squeaking. Well, in that case, seek help from someone, and let that person sit in it. 

Now swivel from side to side. When you apply weight to the chair and swivel it side by side, it will allow you to locate the source of the sound very quickly so that you can apply the oil in the right place. 

Step 4 – Lubricating Oil On The Components

When you apply lubricating oils on the chair’s components, it helps to loosen the joints. The easiest way is to spray oil directly on the chair mechanisms or simply pour a small amount on that area. 

After applying some oil, then pat them to dry. You can also use a soft cotton cloth and rub the oil onto the default area. In this way, you can control the movement of the oil and can avoid pouring extra oil into the area. 

There are chances that the moisture in the air & the air conditioner can cause rust. However, when you regularly apply oil, prevent the unwanted rust from occurring & building up. 

Will WD 40 Fix A Squeaky Chair? The WD 40 Specialist Lubricant is always preferable for many people. It is quick-drying and won’t create any mess, so people prefer using it at home. The best part is it doesn’t hold any strong odor. 

It is waterproof and safe to use on various chair parts, including vinyl, plastic, or even rubber. Check out this amazing product on amazon, here.

If you want to skip using WD 40 Specialist Lubricant, instead use a different product, check out the later part of the article. 

Step 5 – Fix The Spring In The Back Of The Chair

There are chances that the chair may squeak when you lean backward, which usually occurs due to the extensive tension occurring at the chair’s spring. 

How do you fix a squeaky chair’s spring?

In order to fix this, you need to apply oil to the seat spring located inside the turn-knob housing. Follow the initial steps, which are loosening the seat tension turn-knob, removing the turn knob. Finally, spray oil inside the housing.

Step 6 – Time To Fix The Wheels

Office chairs with wheels often seem to make noises. As they move a lot, it is common for the pins in the wheels to require some silicone spray over time.

Turn over the chair and spray some silicone spray on the wheel. Check out my favorite Silicone Spray on amazon for your office chair’s wheels by clicking here. 

Step 7 – One Last Final Check-Up 

After using the office chair for a long time, it is common for the chair to make squeaking noises, as it goes through a lot of wear and tear.

After applying the lubricating oils and tightening the screws, bolts, and nuts, you need to check the chair is uptight. Gently sit on the chair, check if everything is okay. 

How To Fix A Squeaky Chair Without Wd 40?

Get A Synthetic Grease PTFE Lubricant:

Well, as promised earlier, let me recommend you another lubricant that you can use to fix your squeaky chair. Synthetic grease PTFE lubricant from the brand Super Lube will work just fine for the purpose.

Super Lube 21030 Synthetic Grease PTFE Lubricant

This lubricant from Super Lube works very effectively on a number of different materials.You can find it on Amazon by clicking here.

Now, Apply The Lube:

You just need to squeeze the bottle and apply the appropriate amount required. I myself love this odorless lubricant because of its PTFE formula.

The PTFE is a polymer that has the formula to reduce the friction between surfaces while making it stay put longer.

This lubricant is an excellent lubricant to keep around the house. You can apply it whenever squeaky sounds pop up; nonetheless, this product’s bad side is that it isn’t waterproof.

Why Is My Office Chair So Squeaky? [3 Reasons]

An office chair goes under a lot of pressure. The average usage of a particular office chair is 8 to 10 hours a day. It can lead to severe damage to the chair in no time, which further initiates some irritating sounds, thus the squeaking. 

Check out this list of reasons for the office chair is so squeaky:

1. The Chair’s Parts Starts To Come Off

When the chair’s components start to rub against each other, it is customary to hear some irritating noises. As the office chairs go through lots of wear and tear, you will find the parts start to come off. For instance, the wheels and casters can get torn off after long-time use. 

2. Sometimes One Part Can Get Worn Out More Than The Chair’s Other Part

When an office chair goes through a lot of pressure, you will see that it makes disturbing noise. Since one part has gotten more damaged than the other, the office chair becomes bound to make noise. 

3. Tucked Food Crumbs Under The Office Chair

Keeping the workplace is and the office chair clean is mandatory to avoid any kind of unwanted accident or damage.

When you don’t properly clean the chair and get food crumbs under it, it is most likely to create annoying noise. The simple solution to this is to clean the chair frequently

Moreover, sometimes deep cleaning the chair also becomes mandatory. There is a saying, the more you take care of things, the more they will last. 

How Do You Lubricate A Swivel Chair?

Some might find it awkward to lubricate a swivel chair, but trust me, it helps to keep the swivel chair in a good condition. 

Let me mention the step by step process of lubricating a swivel chair;

Step 1 – Gather The Necessary Items

For lubricating a swivel chair, you first need to gather all the necessary things. Well, nothing to worry about, you will need only one thing,

  • Silicon or WD 40 

WD 40, here WD stands for Water Displacement. Is WD 40 a lubricant? It is not really a lubricant, but it contains anti-corrosion agents & elements for penetration, water displacement, and soil elimination.

Step 2 –  Apply The Lubricant On The Hinges

At first, you need to apply some WD 40 on the hinges and cautiously rotate them back & forth. Make sure to apply more if required and let it penetrate all of the crevices & cracks. 

Step 3 – Apply Lubricant Around The Metal And Other Places

The next step is to apply some WD 40 on the metal pole at the bottom of the swivel chair’s back. While doing so, you need to be extremely careful to avoid the fabric area. You need to skip the fabric because the product can stain or wear out the seat cushion over time. 

Tip: A great trick is to attach some tap or paper all around the fabric area so that even accidentally, you don’t spread any WD 40 on the fabric. 

Step 4 – Apply Lubricant To The Swivel Ball

Lastly, apply the WD 40 to the swivel ball that is located at the bottom of each leg of the swivel chair. While applying the product, carefully rotate them clockwise a few times. It makes sure it gets some fresh air before getting attached. 

Make sure to repeat these steps if necessary. A one-time application can make the swivel chair ride smooth for a long time. 

Related Questions

Can You Use Olive Oil On A Squeaky Chair?

Olive oils can sometimes work like magic when applied to make the chair’s riding experience smooth. Moreover, squeaky chairs can be fixed using olive oils.

Using olive oil can be an easy and quick alternative to lubricate the squeaky chair. You need to put some olive oil on a paper towel and rub it over the area that is being squeaky. It will definitely work like magic.

What Is Silicone Grease Made Of?

Silicon Grease, also known as dielectric grease, is waterproof grease. It is composed of silicone oil with a thickener. Mostly the thickener that is used for Silicon Grease is Amorphous Fumed Silica. On the other hand, silicon oil is polydimethylsiloxane (PDMS).

The more specialized silicone greases are made by combining fluorinated silicones. Then again, for low-temperature applications, PDMS contains some phenyl substituents in place of methyl groups.

What Home Remedies That Can I Use To Fix A Squeaky Chair?

There are a few things that can work as a lubricant that you can easily find in your kitchen. First of all, you might be aware olive oil works perfectly on a Squeaky Chair. Apart from olive oil, you can also use kitchen cooking spray oil. 

Applying mineral oils or even petroleum jelly on the squeaky joint will help you a great deal in minimizing the irritating sound. Afterward, you can heat them using a hairdryer so that it reaches the springs and minimize their squeaking. 

Melted candle wax can work significantly on wooden chairs to reduce its squeaking. After the application of the candle wax, you need to sit on the chair and provide some pressure to let it settle.

Final Thoughts

It is very common for an office chair to start squeaking after an extended period of use. Nonetheless, the popping sound can be bothersome, especially in an office environment. 

The best part is that you don’t need to spend a great amount of money to fix this problem, nor do you have to follow a complicated procedure.

However, it would help if you were extremely careful applying the lubricants to the right places. Use a good quality lubricant. If you find the recommended lubricates unaffordable, you can always use some household items to fix the squeaking. 

My recommendation will be don’t postpone the maintenance schedule. Try to take action as soon as you start hearing the squeaking. Remember, the avoidance can lead to serious damage to the chair and the people sitting on it. 

Meraj Jahan

Hey, I am a co-author at Office Chair Trends. Not only have I experience working for extended hours behind the desks at my workstation, but I also have seen people in my surroundings suffer from body aches. Being a reader by day and writer by night, I have researched this matter and gathered knowledge along the way. I am sharing all my experiences on this site.